Universal Case Prep Center
The Universal Case Prep Center is powered by a 24-VOC motor that provides 9 inch-pinds of torque. Reloaders can also adjust the output shaft’s RPM. There are six stations for case preparation; four offer up to 360 RPM, and two provide up to 550 RPM. The spring-loaded feed system offers hands-free trimming, and a single lever loads and unloads cases, then disengages them from the cutter. It has an ambidextrous design and the spring loaded shell holder accommodates case head diameters from .250 to .625 inch, and lengths from .720 inch to 3.375 inches. Micrometer adjustment allows for fast, precise cuts. A shell holder carrier assembly makes adjusting trim length quick and easy. The Universal Case Prep Center includes primer pocket brushes, chamfer and debur tools, and alignment gauge, and it carries a two-year limited warranty.
Includes: .22, .24, .25, .27, .28, .30, .35, .44, and .45 pilots; large and small primer pocket brushes; and primer pocket brushes; and inside chamfer, outside debur and alignment tools.
Summit Single Stage Reloading Press
Unlike other presses, the Summit operates on top of the bench; the case does not move, the reloading die comes down to the case. Its all-steel linkage and cast iron frame provide the stability and ruggedness all reloaders need. The ambidextrous design allows unprecedented access to your cases, and you can quickly change dies. The Summit also offers compound leverage, a massive 2-inch diameter ram, full frontal access, a press adapter bushing, zerk fitting for lubrication, spent primer catcher and 4 1/2-inch die bodies and is made in the USA.
